Roof Top Blox
Roof Top Blox Product Specifications
Black UV stabilized Polypropylene Copolymer .100 to .135″ wall thickness.
1″ thick by 25psi, Type 4 closed cell structural foam.
Dimensions & Weight
8-7/8″ square by 4-1/2″ high, height extension accessory adds 1-1/2″ for 6″ height requirements, Blox can be interlocked end to end for wide multi-piping platforms. Weight: 1lb per Blox
Max load per Blox—Single Point Load: 250lbs./113 kg—Dual Point or Strut-Mounted Load: 350lbs./158 kg. Apply STR-04 slotted steel strut channel under heavy loads over 250lbs.
Space Blox approximately every 7 feet along all piping.
Screw indents guide fastening screws into special internal engineered thread gripping feature. #10 sheet metal screws recommended. Blox supplied with an on board perforated galvanized quick clamping strap for up to 2″ pipe. Top surface easily adapts to all types of piping clamps, clips, slotted steel strut and 3/8″ or 1/2″ threaded rod. All pipe fastening and height adjustments done from top side only.
1-1/2″ Polypropylene top height extender, 10″ slotted steel strut, 12″ threaded rod, pipe rollers, securing brackets, M-1 adhesive, and primer for M-1 adhesive.
Twenty years Roof Top Blox replacement against manufacturer’s defects.
Blox engineered to install on flat roof surfaces for supporting gas, condensate or refrigeration lines, electrical conduits, ductwork or roof top walkways and mechanical equipment. Rated for temperatures up to 200ºF/93ºC.